Taps for threading
Thread Taps: Essential Tools for Precision Threading
Thread taps are essential tools for those working in the machining industry. They enable precise internal threads to be created on various materials, making them indispensable for a wide range of industrial and craft applications.
What are Thread Taps?
Thread taps are cutting tools designed to create internal threads in holes. They consist of a cylindrical body with helical grooves that facilitate chip removal during the threading process. There are different types of thread taps, each designed for specific applications and materials.
Use of Thread Taps in Mechanical Machining
Thread taps are widely used in various industrial applications. Here are some of the main applications:
- Steel Threading
Steel threading requires tools that can maintain their efficiency under pressure. Thread taps are ideal for this application due to their ability to cut through hard materials without losing their sharpness.
Usage:
- Preparation: Make sure the workpiece is well secured.
- Lubrication: Use a cutting fluid to reduce friction and heat.
- Speed: Adjust the speed of the drill according to the type of steel and the diameter of the male.
Threading Aluminium
Aluminium is a relatively soft material, but still requires care to achieve accurate and clean threads.
Usage:
- Lubrication: Use an aluminium-specific lubricant to prevent chip build-up.
- Moderate Speed: Avoid excessive speed to prevent overheating.
- Constant pressure: Apply constant pressure to obtain uniform threads.
- Stainless Steel Threading
Stainless steel is known for its strength and durability, but can be difficult to machine due to its hardness.
Usage:
- Lubrication: Use a cutting fluid suitable for stainless steel.
- Low speed: Maintain a low speed to reduce friction and heat.
- Cutting technique: Use a suitable cutting technique to avoid breaking the male.
- Blind Hole Threading
Blind holes are those that do not pass completely through the workpiece. They require specific threading males to avoid damaging the bottom of the hole.
Usage:
- Machine Settings: Configure the machine to limit the threading depth.
- Controlled Feed: Use a controlled feed to avoid exceeding the desired depth.
- Check: Check the depth of the hole periodically during the process.
Advantages of Thread Taps
Thread taps offer numerous advantages that make them a preferred choice in machine shops and industrial applications:
- Efficiency: Their ability to maintain sharpness even at high speeds increases the efficiency of threading operations.
- Accuracy: They allow precise internal threads, essential for applications requiring tight tolerances.
- Cost-effectiveness: Although the initial cost may be higher than other tools, their durability reduces long-term costs.
Frequently Asked Questions
1. What is the difference between thread taps and dies?
Thread taps create internal threads, while dies create external threads.
2. How can I keep thread taps sharp?
It is important to use taps correctly, avoiding overloading and overheating. If necessary, they can be resharpened using special tools or by hiring a professional.
Thread taps are an effective and versatile solution for a wide range of machining operations. Their precision, durability and versatility make them indispensable in any machine shop. Choosing the right thread taps and using them correctly can make a big difference in the quality and efficiency of your machining operations.
-
-
-
-
-
-
-
A2060
Straight flute tap for blind-holes with left-handed thread KST M KERFOLGfrom €25.25 to €98.58 -
-
-